Sun System Grow Lights
In addition to no water resistance, there are a couple of other things I don’t like about it. First, it doesn’t support daisy-changing, which is important if you have more than two or three plants. Second, it doesn’t have a timer, which I personally don’t like. And lastly, you have no manual control over the spectrum, which isn’t ideal for seedlings.
The only thing I don’t like about the design is its low water resistance. Because it is built out of cooling fins, and without an enclosure, I’d be careful with around it if I’m watering the plant.
Seedlings and mature plants (vegetative phase) prefer short wavelengths of light. These are found in the blue end of the spectrum. Ganja, in its vegetative stage, requires a lot of blue light and UV light. Hence, you need to use a grow light that can emit both blue light (between 400 and 500nm) and a bit of UV light (between 180 and 400nm).
#4 Roleadro Galaxyhydro Series 1000W
This grow light has no water resistance. While this isn’t a problem in most cases, there is always a risk of it shorting out because of high humidity or accidental water damage. Thankfully, it is covered by a 24-month warranty.
First of all, seeds have to be germinated or clones have to be planted depending on the type of crop intended. At this stage, the plants should follow an 18/6 light cycle, which means 18 hours of light exposure, followed by 6 hours of darkness, every day. In this case, it is best to use a timer.
This is where cheap LED lamps shine. In fact, although they are much efficient than HPS lights, wasting way less light. Mind you, different stages of growth require different light spectrums, so check the package for the Kelvin spectrum indicated and choose accordingly.
Use nutrients for growth, such as nitrogen, and if desired start training your plants to use as much space as possible.
Cheap LEDs come in 2700K, 3000K, 4100K, 5100K and 6500K models. Figures at the lower end of the Kelvin scale, such as 2700K, are the type of cheap LED lamps best suited to the later stages of plant growth, while 6500K is best for vegetative growth.
Cheap LEDs for seedlings
In the old days growing marijuana under cheap LEDs was pretty useless as they had a low quality and power. However, the new cheap LEDs cover the entire visible light spectrum, which has made them a viable alternative to HPS bulbs.
First of all, a positive point about cheap LED lamps is that you can find them everywhere: LED lamps are available in every hardware and lighting shop. However, only at Experiencia Natural will you have access to a more specific catalogue of cheap LED lamps.
In today’s article we will let you know everything about the cheap LED marijuana lights. It is an easy to use lighting system that promises great results if you follow a few steps that you can find in this guide on how to use cheap LED lights.
Power and Kelvin Scale
New growers who are learning and want to experiment without taking risks, will find cheap LED lamps are an economical option for gaining experience with growing. Also for those who want to try growing a plant but don’t want to spend a lot.
Plants grow quickly at this stage, so give them some space so they do not grow directly around the lamps. A good solution for smaller spaces is to train them. Techniques such as LST can help to control the plant’s height.