How To Make CBD Vape Oil

CBDISTILLERY

Buy CBD Oil Online

We take you through the steps for how to make CBD vape juice. Find out what you need to make your own oil and and get the bits online from our store >> CBD vape juice, sometimes called CBD e-liquid, is a hemp-based cannabinoid product. It is different from CBD oil in the aspect that CBD juice is specially designed for vaping. CBD vape juice usually contains thinning agents – propylene glycol or vegetable glycerine – to make CBD appropriate for vaping. It is a benefici 5 Easy steps to make CBD vape juice at home – DIY Cannabidiol e-liquid Making your own vape liquid with CBD is easier than you would think. If you have the proper ingredients and some tools you

How to make CBD vape juice

I’m David, co-founder of Vaperun and Vape & Juice I’ve got pretty extensive experience in the vaping industry. I run a Retail Podcast. Responsible for stealing the company’s stock of 6mg Heisenberg and stroker of cats. Find me on LinkedIn

In this article, we are going to take you through the steps for how to make CBD vape juice. You might fancy yourself as a bit of a science type, or maybe even Walter White and quite like the idea of putting on your lab coat and mixing up your own blend.

Can you vape CBD oil?

Can you vape CBD oil is a question that comes up quite often. This is because things get a little blurred and confused around the names. This is an industry-wide issue, so make sure you know you are buying vape juice and not actually oil.

Here are the different names and what they mean

CBD oil – these are tincture drops and are designed to be taken orally

CBD vape oil – these are products which are designed to be vaped, despite the fact it has oil in the title, it is not oil.

CBD e-liquid/vape juice – these are designed to be vaped. It is the proper name for vaping CBD though vape oil and eliquid are often used

So the answer is no. You can’t vape CBD oil which comes in the form of tincture OIL drops.

Why make your own CBD vape juice

You might decide to make your own CBD vape juice if you want complete control over your CBD vape. This means you control the flavour, the cloud, the strength and the terpenes you want.

Having a product perfectly suited to you and your tastes might take a little more effort, however, the end results could well be worth it. The after product may also work out that little bit cheaper in the long run as you can batch make and store.

What do you need to make your own vape juice from CBD isolate?

To make your own CBD vape juice you will need a few things. Some you should have knocking about the kitchen, other equipment might mean a quick visit to ebay or Amazon, and of course, Vape and Juice.

You can buy your isolate and terpenes at a CBD dispensary.

  • A sensitive gram scale
  • A clean and sterile container
  • Funnels, spoons and stirrers
  • Bottles to store the e liquid
  • Pestle and mortar (or you can use a rolling pin and bowl!)
  • A low level heat source such as a pan of warm water or a radiator
  • Your chosen terpenes for flavour and effect
  • CBD isolate – this should be a white powder or translucent slabs
  • Vape juice – either unflavoured VG and PG vape juice fluid in your chosen ratios. If you are using a premade juice, make sure there is 0mg nicotine

How to make CBD vape juice

Right, so you’ve got your equipment ready. Your white lab coat on. You are ready to go. Now… where do you start. Follow our step by step guide for how to make CBD vape juice to make sure you nail it and perfect your own personal blend. Before you get started you need to do a little maths.

Firstly, you want to decide how big your bottles of vape juice are going to be, and what the % of that will be CBD. Here’s where you need to really think about your ratios.

You could create a 100ml bottle of eliquid, however, if you add 500mg of CBD this gets quite heavily diluted to if you had a 10ml bottle with 500mg of CBD. It is important to take this into consideration as it is a CBD vape mistake that we see too often. More on this in the video below.

Along with your CBD volume, you also need to decide your ratio of VG and PG. In brief, VG creates clouds and is good for direct lung inhale, whereas PG is more like a traditional smoking experience with an MTL inhale. You can get down into the detail on our blog Ultimate Guide to Vaping.

Most often, CBD e liquid is made up of 50/50 of PG/VG. However, when you make your own you have the option to add more VG if you are after something a little cloudier.

One thing to note here is to make sure your ratio is going to work with your device. If you have a basic pod or pen, you will want to go no higher than 50% VG. If you have a larger tank then you can go higher, just make sure you don’t heat it to above 200 degrees when vaping.

Okay, enough housekeeping… let’s get into how to make CBD vape juice

  1. Measure out your chosen amount of CBD on your gram scales then crush it up using your pestle and mortar or home improvisation. Set aside.
  2. Decide on your ratios of VG and PG, measure out your bottles and leave them close to a radiator or in a bowl of warm water (with the lids on obvs) for about an hour
  3. Empty the CBD isolate into the warmed up vape juice until it is fully dissolved
  4. Time to add the flavour! This comes in the form of terpenes. You will only need a few drops of your chosen terpenes as they are very concentrated. As a guide, you might add 0.5ml of terpenes for every 10ml of vape liquid
  5. Leave your newly created CBD eliquid in a cool, dry place for 2 days to allow the flavour to steep
See also  Fab CBD Gummies

How to put CBD in your vape juice

You can try the above with your own VG and PG blend, or you can add your CBD isolate powder to ready-made eliquid. This might be your choice if you don’t want to create from scratch completely, or you are happy with the e liquid flavour you have.

You just need to make sure that you don’t add CBD isolate to nicotine eliquid. This degrades the CBD, making it pointless and a waste of money.

Homemade vs shop brought CBD vape oil

  • More control over your product
  • You choose flavour
  • You can select perfect strength and PG/VG ratio
  • Cheaper to buy raw materials and make in bulk
  • Could make it wrong and potentially waste your CBD
  • Regulated
  • Available in different flavours
  • Various strengths to choose from
  • Don’t have to buy large bottles of VG and PG
  • No cost of other equipment such as funnels and juice bottles
  • Easy and convenient

Will CBD get me high?

It doesn’t matter how much CBD you add to your homemade blend, it will not get you high. This is because it doesn’t contain THC – the intoxicating cannabinoid.

Why add terpenes to your homemade CBD vape oil?

Terpenes add flavour to your homebrew, but that is not all. You’ll find terpenes in lavender, pine trees, orange peel, black pepper and so many more. They’ve long been used as alternative remedies, additives to your cleaning products and cosmetic items.

They have their own individual aromas and potential benefits. When you add these to your CBD isolate you create a broad spectrum CBD. This means that it contains terpenes too.

Having your terpenoids along with your CBD is thought to create the entourage effect, where different cannabis compounds work together.

Currently, it is a theory which is supported by a small amount of research. However, there have been lots of anecdotes from cannabis enthusiasts who experiment with different terpenes and cannabinoid blends.

All the ingredients you need to make your own CBD vape juice can be found at Vape and Juice or CBDStar – except the optional lab coat and goggles. We don’t sell those, but you could always order one elsewhere if you really want to look the part.

Adults only (18+)

This website contains adult material and is only suitable for those 18 years or older. Click Enter only if you are at least 18 years of age.

FREE SHIPPING ON ALL PURCHASES OVER $25

  • Dry Herb Vaping Guide

5 Simple Steps To Make Your Own CBD Vape Juice At Home Using CBD Isolate

CBD vape juice, sometimes called CBD e-liquid, is a hemp-based cannabinoid product. It is different from CBD oil in the aspect that CBD juice is specially designed for vaping.

CBD vape juice usually contains thinning agents – propylene glycol or vegetable glycerine – to make CBD appropriate for vaping. It is a beneficial way to consume CBD.

CBD vape juice also differs from the traditional e-liquid. In CBD vape juice, instead of nicotine, manufacturers add CBD extract.

Unlike traditional smoking methods, CBD products have significant health benefits . For these reasons, vape and other electronic devices are getting increasingly popular, especially among beginners. You can even find e liquid clearance sales online and easily find your favorite branded vape box mods and starter kits.

Why should you try making CBD e-liquid at home?

Due to the benefits and popularity of CBD-based products, they are quite expensive. The average cost of a 30ml CBD vape juice container is around $30-$50 .

Making CBD e-liquid at home gives you more control over your vaping experience. You also get to pick the flavor and sweetness of your choice.

Another advantage of making CBD juice at home is that you understand what exactly your CBD vape juice contains.

Main ingredients required to make CBD juice at home

To make a nicotine-free CBD juice, you will need a few ingredients.

1. Vegetable glycerine (VG): is a sweet and odorless liquid extracted by heating plant oils under pressure. VG adds sweetness and a cloud of thick smoke to the vaporizers. For this reason, it is one of the main ingredients.

2. Propylene glycol (PG): is similar to VG, but it holds the flavor much longer and gives a better throat hit (a sensation similar to smoking).

As the only carrier in your vape juice, PG might be harsh for most vape users.

For this reason, PG and VG are often mixed to get the best out of them. Although a 60PG:40VG ratio is ideal since it produces a sweet taste and much more vapor, many prefer a 50-50 mixture of PG and VG.

3. MCT Oil (optional): medium-chain triglyceride, better known as MCT, are fats obtained from coconut or palm kernel oil. Many manufacturers often use MCT oil made from coconut as an alternative to VG and PG. MCT oil is odorless and flavorless and produces big clouds.

4. Terpenes are natural aromas or flavors that many vape juice manufacturers use to give the best possible experience. They are more potent and should be used in the right amount.

CBD isolate resembles a fine white powder. It contains 99% CBD and is considered the purest form.

Additional equipment

  • A 30 ml airtight glass bottle
  • A filling syringe.
  • A digital scale
  • Vaping devices

How to make CBD vape juice in 5 simple steps

The steps mentioned here are for PG (mixed with 3ml flavor) and VG in a 60:40 ratio. You can vary the proportion as per your taste.

See also  Moon Flower CBD Gummies

Note: Before we proceed further, we suggest you should not stress or worry about the precision of the ingredients. Adding or subtracting an extra millimeter wouldn’t make much of a difference.

1. Measure 15ml PG using the syringe and pour it into the empty 30ml container.

2. Use the digital scale to weigh out 500mg (0.5g) CBD isolate. Add this powder to the glass bottle.

3. Shake this mixture vigorously for a minute or two to ensure the CBD isolate powder is completely dissolved. If you still find some solid crystals/powder in the mixture, proceed with step 4. Skip the next step if the mixture is already transparent.

4. Dip the airtight glass bottle containing the mixture in warm water and leave it for 10 minutes. This step makes sure the ingredients inside the bottle melt completely.

5. Use the syringe again and carefully measure 12ml VG. Add this to the solution. Also, add 3ml of flavor/terpene of your choice. Alternatively, you can purchase pre-flavored vape liquids instead of terpenes. Let these ingredients settle. After a few minutes, shake this solution one final time for 2 minutes.

Your vape juice is now ready to go inside your vape tank. Store the rest of the juice in a cold and dark place.

How long can you store your homemade vape juice?

CBD juice lasts for a year or two and sometimes even more if stored properly. Since heat, light, and air shorten the life of your CBD vape juice, store the juice in an airtight tinted bottle away from light and heat.

Making your own CBD vape juice is easy and takes only 15-20 minutes. The majority of vape users try this at home as it gives them more control over their vape juice. Always use quality ingredients to maximize your inhaling experience.

5 Easy steps to make CBD vape juice at home – DIY Cannabidiol e-liquid

Making your own vape liquid with CBD is easier than you would think. If you have the proper ingredients and some tools you are good to go. In this article we will show you exactly how to make your own CBD vape oil at home.

High concentration Cannabidiol e-liquids tend to be quite expensive regardless of the brand, and many people simply cannot afford paying $100 for a single 30ml bottle. But what if there was a way to enjoy them for a more reasonable price? If you don’t mind a bit of DIY work, here are 5 easy steps to make CBD vape juice at home.

1. Get ingredients necessary for CBD e-liquid

Any standard vape juice is made out of four main components: Vegetable Glycerin, Propylene Glycol, Nicotine and Flavorings. CBD eliquids are made using roughly the same ingredients, only that they swap the nicotine for CBD isolate.

CBD isolate is cannabidiol in its purest form. It’s a crystalline substance, that looks and feels like a fine white powder. It has a concentration of 99% and it contains virtually no THC or any other substances. It also doesn’t include the terpenes and organic compounds which naturally occur in the plant.

You can also find CBD isolate in the form of small translucent slabs. In this case you will need a pestle and mortar to mash up the slab into something that’s close to a powder.

Isolate should have a bright white color, and if it doesn’t then it’s probably not 99% pure. There’s nothing wrong with vaping 90% pure CBD powder, however this might have minute traces of solvents used in the extraction process or even some terpenes that might alter the taste of your juice.

CBD isolate is not soluble in Vegetable Glycerin; however VG is required to smooth out the vapor. A purely PG based e-liquid would be very harsh and intolerable for most users. This is why the isolate needs to be diluted in Propylene Glycol first and then add the rest of the ingredients.

Getting the right PG/VG mix is crucial in order to prevent the CBD from recrystallizing. We recommend going as high as 60PG – 40VG, although some users also use 50-50.

And while you can buy pre-mixed PG/VG bases for e-liquids, we recommend purchasing the both the PG and VG separately. This way you have a lot more room for error and if you’re not satisfied with the result, you can give it another try.

Note: we are aware that some online sources indicate oil based carriers like MCT for CBD isolate as the more natural way to go. And that might be true if you intend to use the CBD as a sublingual supplement or if you want to rub it on your skin. But when it comes to vaping, natural oils are very dangerous for the lungs. This is why we always recommend sticking to PG/VG based juices regardless if we are talking about vaping cannabidiol or nicotine.

2. Get the supplies you need to make CBD juice at home

To make your own CBD e-liquid you only need a handful of supplies:

  • pure VG
  • Pure PG
  • CBD isolate
  • An empty 30ml glass bottle
  • A blunt needle syringe
  • Some flavoring

How much CBD should you add to your vape juice?

We recommend adjusting the quantities depending on how much juice you want to make. For testing purposes it’s a good idea to go for the smallest possible supply bottles.

You can find VG and PG in the DIY section of all major online vape shops. This is also the place to look for empty glass bottles, syringes, and flavorings. We found that lemon flavors generally work great with CBD but you can pick whatever you enjoy the most. For testing purposes you can even leave the juice unflavored, however – depending on concentration – it does tend to taste quite bitter.

See also  CBD Oil For Dogs Walmart

CBD isolate needs to be purchased separately and you will usually find it in 500mg or 1000mg containers. The amount of CBD isolate you dissolve in the e-liquid will give its concentration and for starters we recommend going for the 500mg option. It’s also the cheapest, with a price tag of around $15.

3. Measure out the quantities

We decided to go for a 30ml glass bottle because they are easy to find and easy to work with. It will also give you a good estimate of how much money you save compared to store-bought CBD juice.

For the 60PG – 40VG ratio you will need to measure out 18ml of Propylene Glycol and 12ml of Vegetable Glycerin. If you decide to use flavorings, these are usually PG based and you will need to subtract the amount of flavor from the amount of PG. For instance 10% flavor is 3ml, therefore we only need to use 15ml PG and 3ml flavoring.

Keep in mind that these proportions don’t need to be measured out with mathematical precision. You shouldn’t stress yourself too hard when filling up the syringe. It’s not the end of the world if you accidentally added one extra milliliter of VG or PG to the mix. It won’t make that much of a difference if we are talking about a total of 30ml of cannabis isolate juice.

500mg of CBD isolate mixed in 30ml of VG-PG base will give a concentration of 16.6mg/ml – which is perfect for both testing and day-to-day use purposes. At the same time it means that the whole 30ml bottle has a total concentration of 500mg.

4. Mix the ingredients in this particular order

The key to crystal clear CBD e-juice is to dissolve the isolate in PG and add the rest of the ingredients afterwards. For this you will need to pour the 18ml of PG inside the bottle – or the 15ml PG + 3ml flavoring – and then add the isolate crystals. Put on the dropper cap and vigorously shake the bottle for about a minute or so.

Dip the bottle in a container filled with hot water and leave it for around 10 minutes. Shake vigorously and repeat the process until the solution is transparent and there are no visible crystals. You can also leave the bottle overnight and continue the next day.

Once the isolate has been fully incorporated in the PG it’s time to add the 12ml of VG. Give the bottle one final shake of about 2 minutes and your CBD vape juice should be ready to vape.

5. Vaping your DIY CBD e-liquid

Make sure you prime the coils and fill your tank with e-liquid, just like in the case of standard nicotine juice. We recommend a mouth to lung atomizer at first and if you’re OK with the flavor then swap it for a direct lung device.

The taste of CBD can be quite bitter and it’s a good idea to take slow pulls until you get used to it. Also due to the high PG content, the juice might feel harsh on the throat. Some flavors – like lemon – can better mask the bitterness and allow you to enjoy the full benefits of Cannabidiol even better. Some people even like to add terpenes to their DIY CBD juice for a more natural feel. If you plan to do so, make sure that the terpenes are plant derived and compatible with vaping.

Only terpenes derived from cannabis or hemp are safe to be vaped and they ensure the best possible experience. Just make sure you are using the right flavor profile and most importantly: the right amount. Terpenes are much more potent that flavor concentrates and only a very small amount is enough to make their presence felt. Ideally you should start with somewhere between 0.5 – 1.0% and give the mix a try. If the flavor still is not strong enough you can add a bit more terpenes, but as long as you don’t overdo it.

The most popular terpenes for making cannabis juice are the mixtures that mimic the flavor profiles of actual weed strains. Unfortunately these can get quite expensive. However you can still achieve very good results even with individual terpenes like Alpha-Pinene, Caryophyllene, Beta-Pinene, Limonene, Linalool, or Myrcene. From our experience the terpenes most suitable for beginners are the ones with a citrusy flavor like Limonene.

The one thing you need to remember when vaping terpenes is that these compounds are highly volatile. This is why we recommend to enjoy them on low output devices with high atomizer resistance. The experience will be much better when vaped on a 15-20W pen with 1.2 – 1.5 Ohms resistance than on a 50W device at 0.5 Ohms.

In the case of re-crystallization, you either need to use less VG or you can fix it by dipping the bottle in hot water again and shake it thoroughly until it becomes fully transparent.

DISCLAIMER: The text above represents our opinion or personal experience and cannot be considered medical or legal advice. Make sure CBD is legal in your state before making your own e-liquid. Always ask your doctor before using any type of CBD product and consult other sources for a better understanding of the substance and its effects.

Posted by Sam Wagner

My name is Sam and I’m an avid blogger and social media specialist. My two great passions are motorcycles and vaping. I love writing about my experiences and I’m usually the one testing all mods and vaporizers we receive. You will always find me fiddling with tank atomizers, building my own coils or steeping various e-liquid recipes.

How useful was this post?

Click on a star to rate it!

Average rating 4 / 5. Vote count: 1

No votes so far! Be the first to rate this post.